REV'IT! Argon 2 One Piece Suit
The Argon 2 racing suit has a bold, figure-hugging profile constructed from Monaco cowhide, assuring rugged protection from abrasion-resistant leather to keep the luster lasting longer. When you’re setting the pace, PWR|Shell stretch textile liberates your motion, giving you more range to shift riding position as you hold the racing line. And when you’re chasing that lowest lap time, knitted 3D spacer mesh and a perforated outer shell both ventilate and cool you as the track heats up.
Tailor-made protection
With AAA-standard Betac® protection at shoulders, knees, and elbows – this is CE-rated kit designed to take to the track. Protector pockets in this high-safety spec REV'IT! one-piece provides race-ready options of SEESOFT back and split chest protectors. SEESMART hip protection is lightweight and ventilated, and safety seams throughout the suit add inner strength – keeping the outer shell panels tightly fused together.
Pure race aesthetics
Argon 2 is what happens when all-round style meets substance. Feel the part with a look inspired by professional racing leathers – we’re talking outspoken colors, bold graphics, and shoulder armor straight out of MotoGP. Because when you look good, you feel good. And when you feel good, you take to the track with that extra bit of confidence and conviction.
Ventilation panels on upper front
The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.
Perforation on lower front
Perforation at lower back
Perforation on upper legs
Ventilation panels on hump
The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.
Ventilation panels on shoulders
The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.
BETAC® Elbow Protectors
The Betac® protection in our suits is the same as our heroes use in professional racing series such as MotoGP. They are CE rated for the highest level of protection. The use of Velcro makes sure they are fixed to the outer shell, preventing them from moving or turning in case of an impact.
BETAC® Knee Protectors
The Betac® protection in our suits is the same as our heroes use in professional racing series such as MotoGP. They are CE rated for the highest level of protection. The use of Velcro makes sure they are fixed to the outer shell, preventing them from moving or turning in case of an impact.
BETAC® Shoulder Protectors
The Betac® protection in our suits is the same as our heroes use in professional racing series such as MotoGP. They are CE rated for the highest level of protection. The use of Velcro makes sure they are fixed to the outer shell, preventing them from moving or turning in case of an impact.
Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector
The protector pocket in this REV'IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 - an easy upgrade to maximize safety.
SEESMART CE-level 1 Hip Protectors
SEESMART hip protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
Dual comp knee slider type A
Dual-comp knee sliders type A are constructed from a high-performance TPU compound, combined with an extra durable PA6 compound. Specially designed for racers who want high-performance sliders, these higher-quality compounds offer good feedback, giving you maximum durability without compromising your feel on the road. The sliders come in a pair of two, each anatomically shaped to fit either the left or the right knee, and high-quality Velcro attaches the sliders to leathers, ensuring they stay where they need to. Type A sliders are available in three colours, to fit every colour combination of your leathers, and the dual-injected colours keep the design visible even when the sliders begin to wear.
Safety seams
The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV'IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn.
TPU protection at shoulder
Coccyx Protection
Tight fit
The Tight fit is designed to be snug and conform to the rider's body shape. The contouring design ensures that the material and fabrics move with the body, without restricting the range of motion in any situation. This fit is mostly found in base layers and in our race-oriented garments.