Kriega Ducati Panigale V4 US - Drypack Fit Kit

DUCATI PANIGALE V4 & V4S (excluding the V4 Speciale), V2, Streetfighter V4, Streetfighter V4 S and Streetfighter V2 fitting hardware for US-Drypacks. The kit consists of high quality hypalon & nylon webbing loops, that easily fit under the pillion seat using the existing mounting locations. Once fitted, they provide strong hook-on points for any Kriega US-Drypack or US-Drypack Combo.

• 1 x webbing strap
• 2 x bolt-on loops – 65mm – 5mm hole
• 2 x M5 allen head bolts
• 4 x M5 washers

• Remove the pillion seat, unscrew and remove the rear cover.

• Slide the webbing strap over the rear plastic with the loops facing upwards. (top view)

• Locate the webbing between the inner and outer plastics, this maybe a tight fit. Once secured, then replace the rear cover.

(underneath view)

• Slide an M5 washer inside each hypalon end of the 2 x bolt-on loops.

• Add another M5 washer on top and screw in position using the M5 allen head bolts as illustrated here.

• Replace the pillion seat and you have four hook-on points to mount any of the range of Kriega US-Drypacks.